Skip to content
English - United States
  • There are no suggestions because the search field is empty.

PACCAR Davie Login Setup - New Credentials, Setup Emails, and Technician Configuration

Complete first-time setup for PACCAR Davie - order new credentials from AE Solutions, forward the 3 setup emails (including the LOOP/MX access email), and have your technician finish configuration before logging in.

Overview

New PACCAR Davie users cannot log in until credentials are purchased and initial setup is completed by a technician. This article walks through ordering new credentials, handling the three setup emails, and completing first-time configuration. If you already have a working login and only need to change your password, see the related article below.

Note: The legacy mikemuckpb login is no longer active and requires a new subscription.

Step 1 - Purchase new login credentials

Contact AE Solutions to purchase new PACCAR Davie login credentials. Call 913-856-6678 to place the order. Setup cannot begin until credentials are issued.

Haven’t used Davie in a while and can’t log in? Check whether the subscription expired: 

If you used PACCAR Davie (including Davie4) before and cannot log in now, the first thing to check is whether your subscription has expired. This is different from the new-user setup below. When a Davie subscription expires completely, PACCAR turns the software off and you can no longer log in, even if your username and password are correct.

AE Tools can look up your subscription to confirm whether it has expired. If it has, purchase a PACCAR renewal and AE Tools can get you back up and running. If the subscription is still active, see the rest of this article for login setup and password steps.

If PACCAR has deactivated the account after months of inactivity 

If no one logs in to PACCAR Davie for about six months, PACCAR can permanently deactivate the account. This can also happen when the subscription expires. AE Tools does not control this, and it takes longer to fix than a normal renewal. A deactivated account usually shows up when you cannot renew the usual way, or when AE Tools cannot find your account.

If this happens, contact AE Tools and leave the software as it is. AE Tools contacts PACCAR to re-enable the account. PACCAR sends a temporary password after a waiting period, AE Tools changes the password, and then there is a wait of about four to five hours before it works. The same license key is used, and the whole process can take about a day. To avoid this, log in at least every few months and renew before the subscription expires.

Step 2 - Receive and forward setup emails

Once the software is ordered, you will receive three setup emails. Forward all three to the technician assisting you.

Check your spam folder - one of the three emails is for MX access and arrives from sender LOOP. This email is commonly missed because it comes from a third-party identity provider rather than a PACCAR address.

Don't click the links in these emails yourself - forward them unopened to your technician. This applies to renewal and password reset emails as well, not just new setup emails. 

Step 3 - Technician completes setup

Forward all three setup emails to your technician. They will log in and complete the PACCAR Davie configuration on your behalf. You will not be able to log in until this step is finished.

Step 4 - Change your password

Once setup is complete, you can change your password independently at any time through paccar.net. See the related article on changing your PACCAR Davie password for full steps and password requirements.

If a renewed account gets disabled by PACCAR's server-
In some cases, PACCAR's server has automatically disabled an account shortly after a renewal was completed and activation was attempted. This is an issue on PACCAR's side, not a setup error - if this happens, AE Tools needs to contact PACCAR directly to resolve it, so expect a follow-up call rather than a same-session fix. 

Quick checklist

1. Call AE Solutions at 913-856-6678 to order new login
2. Watch for 3 setup emails (check spam folder)
3. Look for email from LOOP (MX access)
4. Forward all 3 emails to your technician
5. Technician completes setup
6. Change your password

Related articles

PACCAR MX Access Portal - Getting Started and First-Time Login - https://knowledgebase.aetools.us/paccar-mx-access-portal-getting-started-and-first-time-login

How to install and activate Paccar ESA - https://knowledgebase.aetools.us/how-to-install-and-activate-paccar-esa

How to Change Your PACCAR Davie Password on paccar.net - https://knowledgebase.aetools.us/paccar-will-not-login-with-activ

Contact AETools for support

For additional help with PACCAR MX Access setup, finding the Loop email, or login issues, contact AETools:

- Phone: 913-856-6678
- Website: https://aesolutions.us - Submit a support ticket online