Skip to content
English - United States
Contact us
  • There are no suggestions because the search field is empty.

How Do I Use Instacode With My Ninja or Gymkana?

How Instacode fits into the key-cutting workflow on Keyline Ninja and Gymkana machines.

Using Instacode with Your Keyline Machine

Instacode can be used as part of a key-identification and cutting workflow when supported by your specific Keyline setup. The exact workflow can vary depending on the Keyline machine, software version, and configuration.

Before You Begin with Instacode

Confirm the Keyline machine is powered on, Liger is running, required Instacode access is available, and the machine is connected appropriately.

Basic Instacode Workflow

  1. Identify the vehicle or key application.

  2. Search the applicable key information in Instacode.

  3. Confirm the key type and application.

  4. Verify the required blank.

  5. Transfer or enter the applicable cutting information into the Keyline workflow.

  6. Confirm the machine and clamp.

  7. Complete the cutting procedure.

Instacode on Ninja

Keyline Ninja uses Liger for its cutting functions and database when working with Instacode.

Instacode on Gymkana

Keyline Gymkana uses Liger for applicable automotive cutting and decoding procedures when working with Instacode.

If the Instacode Workflow Doesn't Work

Check that the Keyline machine is online/connected as required, Liger is running, the machine is registered, the correct application was selected, and the correct key type was selected. If the issue continues, contact AE Tools Support with screenshots and the machine/software information.